|
Special advantages:
Compact design
The rmm 10 works with are proportionally shortened measuring
distance of 1 meter. It is equipped with especially constructed
optical construction simulating the conditions in the light
channel proportionally. There are no special requirements
referring to the installation place so that the device can
be installed right at the assembly / production line.
No dark room or photometrical lab necessary
The system works independently from secondary light sources;
the sample is being illuminated by a powerful Xenon flash
light source with extremely long life time. The triggered
amplifier as well as the light screening housing enable
the system to be used under conditions with normal workplace
illumination.
Short measurement time
There are no protracted adjusting procedure necessary. The
measurement time is extremely short - less than 0,1 sec.
The device consists of the optical housing with a 1 meter
measuring distance. The housing contains at the upper part
the photometrical measurement head and the electronic components.
The optical housing is fixed to the test table. On the test
table the interchangeable sample holder is situated
Technical data: OPTRONIK mm 10 ECE
| Measurement method: |
Integral reflection measurement (ECE) with co-axial
illumination and observation channels |
| Illumination |
Xenon flash light source |
| Measuring receiver |
V (λ) - Silicon-photo element |
| Reference receiver |
V (λ) - Silicon-photo element |
| Measurement distance |
1000 mm |
| Sample inclination |
20' (0.333°) |
| Measurement spot diameter |
Ø 90 mm |
| Interface |
RS 232 |
| Power supply |
90 V...265 V, 50Hz...60 Hz |
| Power consumption |
Max. 80 W |
| Ambient temperature |
+10°C...+40°C |
| Humidity |
10%...90% (non condensing) |
| Dimension (WxHxD) |
1000 x 2200 x 600 |
| Weight |
38 kg |
| Interface |
serial RS 232 |
| Handheld control unit |
|
Scope of supply
- RMM 10 basis unit with measurement optics and flash light
source
- Test table
- Indication and control unit (handheld unit)
- Software
- Instruction manual and assembly instruction (English)
|
