|
Characteristics
- 6 (optionally 7) measurement ranges
- Display range 0.0001 lx (last digit) to 200,000 lx
- 4½ -digit, 7-segment LED display
- V.24-(RS 232-) interface
- Ranging auto/manual, or remote programmable
- Adjustable factor 0.001 - 99.99 for conversion into other
luminous quantities, such as intensity
- Approx. 5 readings/s, integration time 20 ms
- International wide range power supply for 80-270 V
- Power consumption < 20 VA
- Nominal frequency: 40-400 Hz without switching
- Different photometer heads FE10 available 1, 6, 12, 30
mm diameter light sensitive surface
- Superb V(λ)-approximation according to DIN5032,
CIE 69, class A or L, cos-correction available
- Thermostatic stabilization 35° (depending upon version
selected)
- 2 m connection cable, power cable with Euro plug
- Calibration, traceable to PTB standard, with Optronik
calibration certificate
- Individual test report for V(λ)-approximation class
A and L acc. to DIN 5032 part 7
- digiluxControl software included
Options
- Range extension for low level illuminance 0.01 mlx
- Range extension for high level illuminance 2 Mlx
-  Digilumen:
display of both illuminance and flux; fixed lux, freely
selectable lumens calibration
for integrating
sphere applications
- Built-in SLA rechargeable battery, low battery indicator
- Analog output: proportional to measured value analog output
in following versions: 0...20 mA,
resistance max. 400 Ω; 0...10 V, resistance
max. 500 Ω; 0...5 V, resistance max. 500 Ω
- Memory for approx. 1000 measured values
- 4 programmable limit switches
- Automatic light control
- PTB calibration certificate
- Tube for stray light reduction and tripod
- Special extender cable 5 m for photometer head
- Special extender cable 10 m for photometer head
- Special extender cable 20 m for photometer head
- Stable transportation case
Following standard versions are available:
- Digilux 9500-1A (1 mm light sensitive surface, class
A)
- Digilux 9500-6A ( 6 mm light sensitive surface, class
A)
- Digilux 9500-10A (10 mm light sensitive surface, class
A)
- Digilux 9500-10L (10 mm light sensitive surface, class
L)
- Digilux 9500-12A (12 mm light sensitive surface, class
A)
- Digilux 9500-12L (12 mm light sensitive surface, class
L)
- Digilux 9500-30A (30 mm light sensitive surface, class
A)
- Digilux 9500-30L (30 mm light sensitive surface, class
L)
Digilux 9500-6A-EX
Special version of digilux 9500 with detector designed
for out door installation with heating system for automatic
light control or similar applications.
|
